Ultrasonic Plastic Fusion Machine
Jiayuanda Ultrasonic Plastic Welding Equipment-H80/80S. It is an intelligent digital ultrasound welding machine researched and developed by us. We use perfect and optimized real-time phase-locked loop tracking technology in developing this series, which achieves more stable and reliable operation. Flexible human-machine interface configuration gains more flexible product application....
Ultrasonic Welder Machine, also known as ultrasonic plastic welding machine. The ultrasonic wave is transmitted to the plastic processing part through the welding joint. Then, the two plastic joints will be subjected to the action of ultrasonic waves to produce strong friction, and the friction heat will make the plastic joints fully mesh and melt. This technology has the characteristics of fast speed and firm welding. More importantly, it can automate the processing of plastic products. Ultrasonic Plastic Fusion Machine can weld, implant, shape, rivet, cut and other operations on plastics. Just replace the welding joint and you can do all kinds of applications on one machine.
Product Parameter
Products | H80S series Ultrasonic Plastic Fusion Machine | ||||||
Model No. | 15K-3200W | 20K-3000W | 35K-1200W | 15K-3200W-P | 20K-3000W-P | 35K-1200W-P | |
working frequency | 15KHZ | 20KHZ | 35KHZ | 15KHZ | 20KHZ | 35KHZ | |
Working power | 3200W | 3000W | 1200W | 3200W | 3000W | 1200W | |
Working voltage/gas source | 220V±10% / 0.2～0.7Mpa | ||||||
Welding stroke | 100MM | 100MM | 100MM | 100MM | 100MM | 100MM | |
Feature:
1. Classic analog ultrasonic, easy to operate.
2. Welding: time, delay, welding and holding.
3. Fast application conversion and high weld strength.
4. It is suitable for high rhythm and short cycle production.
5. Solid steel structure design is adopted, and the service life is up to decades.
6. Pneumatic components are imported and welded stably.
7. It adopts high-quality sensor and supercharger, which is stable and durable.
8. Automatic protection in case of overcurrent, frequency deviation and overtemperature
Application:
Suitable for welding, riveting and implant molding of fine ABS, PE, PC PS,PP, SAN, PA, acrylic, nylon, ABS and PC composite materials. As long as the welding head is changed, it can be used in a variety of applications, including electronics, electrical appliances, automotive parts, plastic toys, stationery, daily necessities, handicrafts, cosmetics and other industries.
FAQ
How to improve the working stability of Ultrasonic Plastic Fusion Machine ?
1. For a specific machine, the greater the output power of the machine, the smaller the HORN expansion ratio. We need to get stable output power, not just the greater the power, the better, but we should choose the appropriate power according to the characteristics of the material to maintain its stable output.
2. Pay attention to the cooperation between air pressure and voltage
3. The engineer shall carry out reasonable design according to available resources
4.Use power supply voltage stabilizing equipment and stable compressed air
What are the safety requirements and preventive measures for ultrasonic plastic welder generator?
1. Before any electrical connection, make sure that the power supply is off;
2. The ultrasonic generator will generate high voltage, so turn off the power switch before operating it;
3. Unplug the main electrical plug;
4. Wait for two minutes to fully discharge the capacitor;
5. Do not open the shell of the electric box;
6. When testing the ultrasonic generator, please use the multimeter with ungrounded battery as the power supply;
7. Do not put your hands under the welding head
8. Do not perform welding when the high-frequency cable or transducer is disconnected
For more details of Ultrasonic Plastic Fusion Machine, please feel free to contact us ！
Send Inquiry
