What Are The Accessories Of Ultrasonic Cleaning Machine?

Ultrasonic cleaning machine is mainly composed of eight accessories, such as ultrasonic generator, ultrasonic transducer and other auxiliary systems.

1. The generator is one of the most important parts relative to the machine itself. The ultrasonic generator turns the power frequency electricity into a high frequency electrical signal of more than 28KHZ, which is transmitted to the transducer through the cable. Generally, the ultrasonic transducer is fixed on the bottom plate of the cleaning tank, which is filled with liquid. When the transducer is applied with a high-frequency voltage, its piezoelectric ceramic elements will produce longitudinal vibration under the action of the electric field.

2, ultrasonic transducer (also known as sound head) is a kind of high efficiency energy conversion component, can convert electrical energy into a strong ultrasonic vibration, in the production of ultrasonic vibration, as if it is a small piston, the amplitude is very small, about only a few microns. But this vibrational acceleration is large (tens to thousands); There are many transducers on the groove. When the same frequency and phase of electric energy are applied, a huge piston is synthesized for reciprocating vibration. The phenomenon of vibration is what we call ultrasonic wave at ordinary times.

3, heating and temperature control system: the heater adopts cast aluminum heating sheet, acid and alkali resistance, long service life. The purpose of heating is to heat the cleaning agent to increase the washing effect of the cleaning machine. The temperature is automatically controlled and can be adjusted at will within the appropriate range.

4, ultrasonic cleaning tank: cleaning tank is made of SU304 stainless steel by argon arc welding, the tank body is provided with slag discharge access, insulation layer, etc..

5, tank liquid circulation filtration system: in the system is provided with a filter, the tank liquid dynamic filtration, to maintain the cleanliness of the tank liquid. When the workpiece is out of the groove, the filtered liquid flows through the upper part of the tank to wash the workpiece once, so as to flush the workpiece out of the groove, in order to avoid its pollution to the lower channel liquid.

6. Conveying system: according to the shape, volume and batch of the workpiece being cleaned, the conveying mode and control mode of ultrasonic cleaning machine are determined. Typical conveying modes are catenary, net belt, double chain, stepping, electric hoist, self hoist, drum, turntable, gantry frame, manipulator, hanging basket, push plate and so on.

7, spray rinsing system: according to the surface condition of the workpiece to be cleaned, some cleaning machine is equipped with spray rinsing process, ultrasonic cleaning and spray cleaning organic combination.

8. Drying system: according to the condition of the workpiece being cleaned, some cleaning machines are equipped with drying system. The drying system is mainly composed of heater, fan, blower nozzle and so on, and the temperature is automatically controlled.