What Are The Common Misunderstandings Of Ultrasonic Welding Machine?

Misunderstanding of ultrasonic output power; The size of ultrasonic output power is determined by the diameter, thickness, material and design process of piezoelectric ceramic sheet. Once the transducer is finalized, the power will be finalized. Measuring the size of output energy is a complex process.

It is not that the larger the ultrasonic transducer, the more power tubes used in the circuit, the greater the output energy. It requires a quite complex amplitude measuring instrument to accurately measure its amplitude. Because most users know too much about ultrasonic knowledge, coupled with the misleading of some salespersons, it gives consumers a wrong understanding.

The amount of electric energy consumed does not reflect the size of the output excess power. For example, the low longitudinal energy produced and the high consumed current can only indicate the low efficiency of the equipment and the high useless power.

Misunderstanding in the selection of ultrasonic welding machine: how much output power, oscillation frequency and amplitude range should be used should be considered according to the material of the workpiece, the area of the welding line, whether there are electronic components in the workpiece, whether it should be air tight and other factors. Mistakenly believe that the greater the power, the better. This is also a misunderstanding.

If you don't know much about ultrasound, consult the engineering and technical personnel of a regular ultrasonic machine manufacturer.