Cause Ultrasonic Cleaning Machine Does Not Heat What Factors?

The ultrasonic cleaning machine sold on the market, in addition to the household small cleaning machine, the function of the more comprehensive cleaning machine, heating function is the most common function. The heating function of ultrasonic cleaning machine can effectively improve the efficiency of cleaning, the general heating function only supports heating to 80 degrees Celsius, and then high, the effect of cleaning is not much, and 80 degrees has reached the boiling point of a small part of the liquid, the temperature can reach the boiling point of most of the liquid.

If you buy an ultrasonic cleaner with heating function, but in use when the heating function fails, what is the specific reason?

1. The connection between heating film and circuit board is disconnected;

2. Set the temperature lower than the actual temperature;

3, heating film burned out;

4. The temperature setting module of the control panel fails.

For these possible causes, we can judge and deal with them in the following ways.

1. Check whether the heating film is disconnected from the circuit board. If so, you can connect it and test it again.

2. When the temperature you set is lower than the actual temperature of the liquid, the heating function is not turned on. You can check the temperature you set and raise the temperature before testing whether the heating function is enabled.

3. The heating film is generally covered on the outer surface of the ultrasonic cleaning tank, and you can watch whether the phenomenon of burning out occurs. If the heating film is burned out, you need to contact the manufacturer for replacement and maintenance.

4. If the above reasons are excluded, the most likely problem is the control panel.