Do You Need Detergent For Cleaning Hardware With Ultrasonic Cleaner?

Can washing powder be added to the hardware of ultrasonic cleaning machine for wax removal? The answer is yes. Wax can be removed with ordinary water and some soap powder. If it is degreasing, it is suggested to add some degreasing detergent. When cleaning in large quantities, we can customize and modify the oil filter for the ultrasonic cleaner, so that the water can be used in the circulating system without changing the water frequently. Professional paint remover is available for rust prevention treatment. For the elimination of debris on the hardware, if the hole is buried, the actual effect will not be good. Because ultrasonic cleaning is mainly to get rid of surface stains, but it can not be eliminated. Short buried holes have no problem and can eliminate the slag inside the holes.

As for the frequency of hardware ultrasonic cleaning machine, generally speaking, 40KHz is a universal frequency, which can be used for hardware cleaning, which has also been confirmed in many customers' specific applications. However, higher frequency can be considered for some complicated and high-precision hardware, such as 80KHz, while some hardware must be 28KHz in reverse, mainly for rust prevention treatment or more slag. There are various types of hardware and various structures. The key cleaning work is wax removal, ash removal, rust prevention treatment, oil removal and slag removal. The manual service cleaning is time-consuming and laborious. Now the labor cost is high. Therefore, the hardware cleaning is increasingly carried out by ultrasonic cleaners, especially when the total number is large and the structure is complex.

The advantages of the ultrasonic cleaning machine depend on its cleaning method: immerse the hardware in the liquid of the cleaning tank, use the high frequency of ultrasonic wave, convert it into high frequency mechanical energy according to the ultrasonic transducer, and then use it to clean the liquid substances in the tank, so that the liquid can cause cavitation effect, continuously produce numerous tiny bubbles, and quickly crack, causing impact force to impact the surface of the articles, so that the surface stains can be removed, So as to achieve the actual effect of cleaning. In this way, as long as the water can touch the location can be cleaned up, all-round and complete, leaving no dead angle. In addition, it can also be used in every position of hardware, which is not cleaned bit by bit like manual service, so it is highly efficient.