What Is The Correct Way To Use The Ultrasonic Cloth Sewing Machine?

Aug 10, 2022

Ultrasonic lace stitching machine is standardized. The correct use of ultrasonic lace sewing machine will help to ensure the stability of the machine's performance, maintain the quality of product craftsmanship and improve the service life of the machine.

The use process of ultrasonic lace stitching machine

1. Turn on the power switch (220VAC)

2. Adjust the lowest resonance. Under the condition of no load, adjust the screw's entry and exit position by rotating the frequency, watch the ammeter, and set the lowest current value as the best work and resonance.

3. Reduce the air pressure to 0, 5~1, 5Kgf/cm

4. Adjust the speed of the flower wheel to a low speed.

5. Adjust the rotating speed of the welding head to a low speed.

6. Pass a piece of white paper through the welding head (HORN).

7. Try processing to see how uniform the lines are pressed out on the white paper, you can know whether the flower wheel is level. If not, the procedure for adjusting the level of the flower wheel.

8. Adjust the flower wheel level adjuster to make the processed parts get the best uniform state of melting and cutting

9. Tighten the screw on the knob to lock the flower wheel adjuster.

10. Adjust the rotation speed knob of the flower wheel to make the rotation speed of the flower wheel reach an appropriate speed.

11.Change to the actual processed fabric, and slowly increase the pressure from low pressure to the best melting and cutting pressure. Please try not to exceed 5kg/cm2 (excessive pressure or more than 5kg/cm2 will reduce the flower wheels and corners).

12. If the level of the fabric is different from the requirements, you need to adjust the level or inclination of the flower wheel again.

13. After completing the level adjustment work, please unscrew the adjustment nut on the upper end of the cylinder and fix it. The minimum height that can be removed is the best condition.

14. Start processing.

15. After ultrasonic sewing machine cloth finishing processing, please turn off the main power supply, but do not remove the air pressure source.

ultrasonic lace welder