What Precautions Must Be Known When Using Ultrasonic Cleaning Machine?

First, the importance of the basket

The basket is an important part in the purchase of ultrasonic cleaning machine. In general, the cleaned objects are to be cleaned in the basket. One of the requirements of ultrasonic cleaning is to ensure that the cleaning material is in the middle of the cleaning fluid. That is to say, it is necessary to ensure that the cleaning liquid is immersed in the cleaning material, but also to ensure that the cleaning material does not touch the bottom of the cleaning tank. The role of the basket is to ensure that the product to be cleaned in the middle of the cleaning solution.

Second，It is forbidden to start without liquid in the ultrasonic tank

The most important part of the ultrasonic cleaning machine is the ultrasonic vibrator transducer. The vibrator is attached to the bottom of the cleaning tank. If there is no liquid on the machine, the high-frequency vibration produced by the vibrator is only transmitted to the ultrasound cleaning tank. If the oscillator is damaged, it can only be returned to the factory for replacement.

Three, the use of cleaning agent

Adding cleaning agent in the cleaning process can achieve twice the result with half the effort, but the use of cleaning agent is not unlimited, when you use the cleaning agent is flammable or corrosive, please use with caution. Ultrasonic cleaning will release energy, there will be a slow rise in temperature, and even some cleaning machines with heating function, so when using inflammable cleaning agents need to be extra careful.

Four, ultrasonic cleaning machine maintenance

Most people think that the maintenance of the cleaning machine is to empty the water in the cleaning tank, and then dry the residual liquid is enough. In fact, many people ignore the liquid in the pipeline, cleaning machine inlet and outlet in fact, there are residual liquid, a long time without the machine and not clean up the liquid in the pipeline, may corrod the pipeline or valve. The method of cleaning is to blow through the air compressor on the pipe, the liquid inside are blown out.

Five, the choice of ultrasonic frequency

For our cleaning and stains, we must choose the appropriate ultrasonic frequency. If the frequency is not right, the cleaning effect will be poor, and the cleaning will be damaged. For example, when cleaning very precise objects, we need a higher frequency of ultrasonic frequency, if the use of low frequency will damage the object, and easy to produce "corrosion point". While cleaning more rough, and more stains and difficult to remove the object, you need to use low-frequency ultrasonic, if the use of high-frequency ultrasonic, cleaning effect is very effective.