Installation Inspection Of Ultrasonic Vibrating Screen Machine

1, according to the identification of the ultrasonic generator connection line, directly inserted into the interface and locked, so that the power supply of the ultrasonic generator and the ultrasonic interface of the sieve machine are connected correctly.

2, the ultrasonic generator power on the fine-tuning screw twist to the minimum, turn on the ultrasonic generator power switch, ammeter investigation is abnormal, (under normal circumstances, the current should be less than 200mA).

3, check and debug the three-dimensional vibrating screen filter, and make the material running track to reach the standard running track.

4, run three dimensional vibrating screen points filter (rotary vibration screen), slightly feeding and fine-tuning ultrasonic generator power on the fine-tuning twist, so that the screen to an ideal condition. (Current should be less than 200mA)

5, in the normal condition of the ultrasonic vibrating screen, you can evenly feed and then enter normal operation.