Operation Steps Of Ultrasound Cleaning Machine

1. Place the machine in a ventilated and dry area? Are there ventilation holes on both sides of the fuselage? Should it be cleaned regularly? So that the air can flow smoothly.
2. Inject cleaning solution into the cleaning tank. Do not suddenly pour overheated cleaning solution into the cleaning tank. Do not start the machine with too little cleaning solution and no liquid in the inner tank. Generally, if heating is not required, the liquid level is greater than 1/3 of the height of the inner tank? If heating is required, the liquid level shall be higher than 3/4 of the height of the inner tank.
3. Connect the triangular power plug of the ultrasonic cleaner? Plug into single-phase 220V ± 10%, 50Hz AC power socket with good grounding.
4. Press the "Ultrasonic" button? Is the power signal light on? At this time, the liquid in the tank begins to vibrate and cavitate. If heating is required, select the heating temperature first? Room temperature~80 ℃ can be adjusted, and the heating temperature is usually 50 ℃? Then press the "heating" button, and do not let the ultrasonic solution in the inner tank work at a temperature above 80 ℃ for a long time.
5. After cleaning? Need to turn off the power of the ultrasonic cleaner? Then the cleaning fluid to be replaced can be discharged.