Ultrasonic Cleaner For Car Parts

The Ultrasonic Cleaner For Car Parts is mainly used for cleaning, drying, spraying and rust prevention of automobile parts such as engine block. After ultrasonic treatment, the oil, dust and particulate impurities attached to the surface of the cylinder block of the automobile engine can separate the attachments from the metal surface. After high-pressure spray washing, the particulate impurities and oil stains on the metal workpiece can be thoroughly cleaned, so as to achieve the ideal cleaning effect that cannot be achieved manually.

FAQ:

Q: How to Change 380V to 220V for Ultrasonic Cleaning Machine ?

There are many ways to change a 380V motor to a 220V one, and here the focus is on discussing the method of changing to a 220V one without three-phase electricity,

1. When changing, the connection method of the three-phase winding remains unchanged, that is, the original star connection is still star connection, and the original corner connection is still corner connection. Any two of the three outgoing terminals originally connected to the three-phase motor are connected to both ends of the power supply (L-live wire, N-zero wire), and the remaining one is connected to the capacitor first.

2. The other end of the capacitor is connected to one end of the power supply, whether it is connected to the live wire or to the zero wire, depends on the desired direction of rotation, and the direction of rotation varies depending on the connection method.

Another more reliable approach is to install a single-phase 220V input three-phase 380V output frequency converter, so that the motor does not require any modifications.

Q: How many parts can we put in the Ultrasonic Cleaner Tank?

Answer: This actually depends on the size of the water tank. We provide several ultrasonic cleaners in common sizes to serve various applications.

We divide ultrasonic cleaners into three categories:

Desktop ultrasonic cleaner;

Medium volume ultrasonic cleaner;

And large capacity ultrasonic cleaner.

The specific information of each aspect is as follows.

The bench type ultrasonic cleaner is very small; It is equipped with a single tank, which can be sitting on a table, shelf or workbench. They are also portable and ideal for small, lightweight applications.

Medium capacity ultrasonic cleaner is the ideal choice for various industrial, automotive, aerospace and engineering industries.

Large capacity Ultrasonic Cleaner For Car Parts are designed to handle large and heavy equipment and parts, including various industrial parts, automotive and aviation parts, and these units usually have washing and drying tables and other functions.

Q: How long does Ultrasonic Cleaning For Car Parts usually take?

A: We cannot say that a specific cleaning cycle has a fixed time. In fact, it depends on several factors: the amount of dirt and contaminants on a given part; How clean this part needs to be; Ultrasonic cleaning fluid used; Temperature of the groove where the parts are cleaned; wait. That is, compared with other methods (the most famous one is hand washing), the time required for ultrasonic cleaning to clean most parts in industrial, automotive, aerospace or medical applications is greatly reduced.

For example, for car parts that have been cleaned in an ultrasonic cleaner we sell, the cycle time is three minutes. In that short time, the machine was removing carbon, grease and any other pollutants from the car parts. On manufactured parts, the cycle time can be much shorter - in many cases, less than a minute.

For more details of Ultrasonic Cleaner For Car Parts, please feel free to contact us !