Maintenance of ultrasonic vibrating screen

1. Check the cooperation with the screen machine during the motor rotation, check the tension of the belt and the lubricating oil of the exciter bearing.
2. The vibration force of the vibrating screen is very high, and the support beams between the screen boxes on both sides need to bear a large impact force, so it is very important to fix the interface. The traditional way is to connect by welding, but the effect is not good, and it is easy to tear and cause accidents. The cold riveting process used by the tidal front can avoid this situation.
3. It is forbidden to continue feeding after the vibrating screen equipment has stopped running to reduce the loss of the whole machine and screen.
4. The high temperature phenomenon at the seal of the shale shaker is usually caused by the aging of the seal ring or the inadequate installation and coordination, which should be replaced in time. The test method is to gently touch the seal after the equipment is started for a certain period of time. If the temperature is too high, it should be replaced in time.
5. The material selection of the screen box is also very important. Good material can enhance the impact of the vibration exciter on the equipment