Cylinder Head Ultrasonic Cleaning Machine

Automotive engine components are inevitably contaminated with dust, oil, and other pollutants during daily production and use, which can affect their normal use and seriously reduce their service life. Therefore, it is necessary to carry out professional and effective industrial cleaning, which requires professional industrial cleaning equipment. Choosing an industrial ultrasonic cleaning machine is currently the most common industrial cleaning equipment.

Usage of Cylinder Head Ultrasonic Cleaning Machine:
1. Connect the cable connecting the generator to the cleaning tank;
2. Inject the selected cleaning solution into the tank;
3. Connect the generator to a 220V ± 10% 50Hz AC power supply;
4. Turn on the power switch of the generator, and the power indicator light will be on (at this time, the liquid in the tank will start to vibrate and cavitation);
Precautions for using ultrasonic cleaning machines:
1. It is recommended to place the equipment in a ventilated and dry area, and the fan holes behind the generator should be cleaned regularly to effectively extend the service life of the ultrasonic cleaning machine;
2. There are ventilation openings on all sides of the generator to ensure unobstructed airflow;
3. The cleaning tank must be filled with liquid before it can start working. The minimum water level height is greater than 100mm (bottom vibration type) and it should be placed horizontally. When the transducer is on the side, the cleaning tank edge should be 100mm away. If the machine is started in an air state, it will damage the machine;
4. To avoid loosening the transducer and affecting the normal use of the machine, do not directly inject high-temperature liquid into the cylinder when the cleaning temperature of the cylinder is at room temperature;
5. When the cleaning solution needs to be replaced due to contamination, do not directly inject the low-temperature liquid into the high-temperature cylinder, as this can cause the transducer to loosen and affect the normal use of the machine;
6. When the cleaning solution needs to be replaced due to contamination, do not directly inject low-temperature liquid into the high-temperature cylinder, as this can also cause the transducer to fall off. At the same time, the heater switch should be turned off to prevent damage to the heater due to the absence of liquid in the tank;
7. Regularly inspect the transducer to avoid dampness and impact, in order to avoid unnecessary losses. After use, the main power should be turned off. Do not immediately restart after shutting down, the gap time should be at least 1 minute.

FAQ：

What are the cleaning ranges of Industrial Cylinder Head Ultrasonic Cleaning Machine?

1. Metal parts: such as engine components (cylinders, pistons, valves, etc.), gearbox gears, bearings, chains, brake system components (brake discs, brake pads, etc.), fasteners (bolts, nuts, pins, etc.), and other metal components.

2. Electronic components: automotive electronic modules, sensors, circuit boards, relays, switches, etc. These components often require high cleanliness to ensure electrical performance.

3. Optical components, such as car lamp lenses, reverse camera lenses, etc., need to maintain a high degree of transparency and cleanliness to ensure normal operation.

4. Plastic and rubber components: dashboard, interior parts, sealing strips, rubber washers, etc. Ultrasonic cleaning can remove stains and residues on these materials.

5. Filters: Air filters, fuel filters, oil filters, etc. Ultrasonic cleaning helps restore the filtering efficiency of the filter element.

For more details of Cylinder Head Ultrasonic Cleaning Machine, please feel free to contact us !