Ultrasonic Rubber Slicing Machine
Jiayuanda ultrasonic rubber cutting system is composed of an automatic frequency tracking generator, a high-Q ultrasonic transducer, and a titanium alloy cutting knife(cutting knife width included 20Khz 95mm,190mm,254mm,355mm; 40Khz 85mm 120mm 190mm).It has a good performance in rubber cutting. The whole machine is simple and convenient to install, real-time frequency tracking, adjustable amplitude, abnormal protection, etc.; it can be controlled by PLC or RS485 communication....
Ultrasonic Rubber Slicing Machine has a great feature, when it has cutting, the cutting parts can be fused, and the cutting area can be completely sealed to prevent the cut material from being loose.
Product parameters of ultrasonic rubber cutter
Ultrasonic Generator | JYD-2700S | JYD-2700S | JYD-2700S | JYD-2700S | JYD-2700S | JYD-2700S | JYD-2700S |
Frequency | 20KHz | 20KHz | 20KHz | 20KHz | 40KHz | 40KHz | 40KHz |
Power | 2000W | 2000W | 2000W | 2000W | 1000W | 1000W | 1000W |
Cutting knife width | 95 mm | 190 mm | 254 mm | 355 mm | 85 mm | 120 mm | 190 mm |
Cutting knife material | Titanium alloy | Titanium alloy | Titanium alloy | Titanium alloy | Titanium alloy | Titanium alloy | Titanium alloy |
Application:
Rubber, non-vulcanized latex, plastic sheets can all be ultrasonically cut
Advantage of Ultrasonic Rubber Slicing Machine
1. Capable of accurately dividing materials
2. It can meet the cutting of non vulcanized rubber products
3. Safe and high performance
4. It can meet the requirements of continuous or intermittent cutting
5. Low tool wear rate
6. Edge banding can be welded at the same time
Features:
1> There is no need for sharp edges, the blade wear is small, and the cutter head can be replaced by itself;
2> The temperature of the cutter head is lower than 20 ℃, smokeless, odorless and pollution-free;
3> When cutting, only a small amount of pressure is needed, so as to reduce material deformation and wear;
FAQ:
Is it necessary to regrind the blade?
When using ultrasonic technology, the sharpness of the edge is not so important, and there is no need to grind the blade. Professional design and high-strength tool materials greatly improve the service life of tools and improve the efficiency of use. Ultrasonic high-frequency vibration motion cutting has a greater cutting effect than tool sharpness. (if the ultrasonic cutting tool is worn or damaged, you should return back our factory for sharpening and tuning)
For more details of Ultrasonic Rubber Slicing Machine, please feel free to contact us !
Send Inquiry
