Adjustment Method of the Flower Wheel of the Ultrasonic Embossing Machine

1、 Use A4 paper to put it in the Ultrasonic Embossing Machine pressing wheel and the flower wheel, and adjust the pressure to 1.5KG. Loosen the adjusting nut of the cylinder of the flower wheel upward without limit, then adjust the speed buttons of the upper and lower moulds to the scale 2 position, adjust the output power to the 4 position, press the pressing wheel switch, then step on the flower wheel pedal, and then step on the foot pedal. After the flower wheel has gone through at least one circle, release it, and step on the flower wheel pedal to let the flower wheel rise. At the same time, press the pressing wheel switch to let the pressure wheel rise. Take out the white paper, and check whether the embossing is balanced.

2、 When Ultrasonic Embossing Machine is unbalanced, first loosen the eccentric locking screw on the left cover plate of the mold base, and then rotate the eccentric (clockwise, the flower wheel moves upward; counterclockwise, vice versa, lock the eccentric, and repeat the above actions until it is balanced.

3、 After adjusting the levelness of the flower wheel with A4 paper, please simultaneously rotate the adjusting nut of the flower wheel cylinder downward to limit the position, so that the flower wheel is just in contact with the steel mold. (To prevent the sliding of the flower wheel from colliding with the steel mold)

4、 Adjust the pressure of the flower wheel according to the thickness of the sewing or knurling materials. The pressure of thicker materials shall be increased, and vice versa.

5、 According to the different materials to be fused, the different thickness, and the complexity of the pattern of the flower wheel, the force is adjusted comprehensively to achieve the ideal fusing effect.