Do you know the common mistakes of ultrasonic welding machine?

At present, the use of ultrasonic welding machine has been quite popular, and product packaging, cutting, riveting, embossing, drilling, and other industries are indispensable equipment. Therefore, various ultrasonic welder machines with various functions have also emerged.

Misunderstanding of ultrasonic output power; The size of ultrasonic output power is determined by the diameter, thickness, material and design process of piezoelectric ceramic sheet. Once the transducer is finalized, the power will be finalized. Measuring the size of output energy is a complex process.

It is not that the larger the transducer, the more power tubes used in the circuit, the greater the output energy. It requires a rather complex amplitude measuring instrument to accurately measure its amplitude. Because most users know too much about ultrasonic knowledge and some salespeople mislead, it gives consumers a wrong understanding.

The amount of electric energy consumed does not reflect the output excess power. If the longitudinal energy is low and the consumed current is large, it only shows that the equipment is inefficient and the reactive power is large.

Misunderstanding of ultrasonic welding machine selection: how much output power, oscillation frequency and amplitude range should be used should be considered according to the material of the workpiece, welding wire area, whether there are electronic components in the workpiece, whether it should be air tight, etc. Mistakenly believe that the greater the power, the better. This is also a misunderstanding.