What are the issues to consider when welding automotive wire harnesses using ultrasonic wire harness welding machines?

Dec 04, 2023

There are many benefits to ultrasonic car wire harness welding, but at the same time, what should be considered for ultrasonic car wire harness welding? What are there?
The following issues must be considered for ultrasonic car wire harness welding:
1. It is best not to tin or galvanize the cable. Although it can be soldered under certain conditions, the effect will still be discounted (the same square diameter of wire requires different welding power levels, and the welding power of tinned wire should be significantly higher, and tinned copper wire is harder than copper wire, making it easier to disconnect).
2. Select the model based on the product of the cross-sectional area of the cable.
Technical requirements for ultrasonic wire harness welding machine, according to IPC standards:
a. Standard ultrasonic welded wire harnesses with a width to thickness ratio between 1:1 and 2:1;
b. The cable must not show any discoloration;
c. The contour of the strands can be recognized on the pressurized surface, but there are no loose strands, in other words, there should be no burrs.
d. After welding, the wiring harness should not be disconnected, therefore, according to the above standards and the multi specification requirements of automotive wiring harness manufacturing.
There are the following technical standards for ultrasonic wire harness welding machines:
1. The ultrasonic power is continuously adjustable. Due to the loss of ultrasonic energy in the thickness direction of the wire bundle, the higher the required ultrasonic mold power for thicker wire junctions. The ultrasonic power is continuously adjustable and can also prevent discoloration of the surface of cables of different areas. When welding 1mm and 15mm wire harnesses on the same machine, the power can be adjusted to ensure the perfect welding of the wire harness.
2. The clearance requirement for wire head fixtures is ≤ 0.02mm. Ultrasonic welding is high energy density, and large gaps can cause wire sticking.

3. Quality control software. Require the machine to be able to make quality judgments on each welding point: identify which situations are welding defects, which situations are missing lines, etc., and provide warnings.

 

ultrasonic metal welder 7