Why use industrial ultrasonic cleaning machine to clean electroplated workpieces?

1. It can improve the quality of electroplating pretreatment

Before electroplating, the surface of workpieces needs to be cleaned. The oil stain on some workpieces is stamping oil. The density of this grease is relatively high, and it is difficult to clean it thoroughly by conventional methods. However, if it is not cleaned up, the electroplating quality will be affected. The industrial ultrasonic wave cleaner can generate bubbles through ultrasonic wave, and can smash and clean the grease molecules on the surface of workpieces, Thus, the processing quality of the workpiece before electroplating can be improved.

2. Be able to clean places that are difficult to clean

Different workpieces have different shapes. Some workpieces are not only irregular in shape, but also have many included angles, gaps and deep holes. For example, if these places are cleaned by conventional methods, it is not easy to wash away the stains. The industrial ultrasound cleaning machine uses physical principles, and there is not much difference between cleaning these places and the plane of the workpiece, so it is possible to clean these very difficult places.

3. Capable of cleaning electroplating residual solution

Although the workpieces need to be rinsed after finishing the electroplating treatment, there are still some electroplating solutions left on the surface of some complex workpieces, especially in deep holes and blind holes. The industrial ultrasonic cleaner with high frequency and high power density can clean these electroplating residues.