Ultrasonic Record Cleaning Machine

This Ultrasonic Record Cleaning Machine is made of high-quality stainless steel. The appearance design of jiayuanda ultrasonic cleaning machine is simple and generous, which can meet the needs of most European and American consumers.

In order to provide a clean foundation for the digital collection of information recorded on vinyl records, and to eliminate or at least minimize the adverse effects of various harmful residues such as dirt, floating dust, mold, and oil stains on the surface of vinyl records on the quality of collected signals, it is necessary to clean vinyl records.

For the cleaning method of moldy or dirty black glue, it is necessary to avoid playing black glue when it is not processed, as mold and dust can squeeze into the stylus and groove, thereby damaging the sound track. If ultrasonic cleaning can be used to clean the black film, it is also a good method. The ultrasonic cleaning machine can comprehensively clean the dirt on the surface of the black film, without affecting the recording effect and sound quality of the black film record. It has the characteristics of simple operation, convenient use, and good cleaning effect.

Ultrasonic cleaning of vinyl records is also very perfect, but there are also many issues that need to be paid attention to during cleaning. For example, the vinyl itself is a non aqueous substance, and some surface activators (non ionic cleaning agents, such as p-tert octylphenol polyoxyethylene ether) need to be added to the ultrasonic cleaning solution to enhance the hydrophilicity of the vinyl and improve the descaling effect of ultrasound on the surface of the vinyl. After cleaning, it is necessary to dry immediately to maintain the dryness of the black glue.

Specification of Ultrasonic Record Cleaning Machine:

FAQ：

Reasons and Treatment Methods for Unheating of Ultrasonic Record Cleaning Machine

Sometimes the ultrasonic cleaning machine does not heat, which is mainly caused by the following reasons:

1. Poor connection of heater power supply;

2. The fuse is burnt out;

3. The heating plate is burnt out;

4. The digital display control board fails;

5. Other reasons.

For these reasons, several treatment methods are also proposed for ultrasonic wave:

1. Check the heater plug and make sure it is in good contact. Use a multimeter to check the outgoing lines at both ends of the heater, which are conductive and have a resistance value of about several hundred ohms;

2. Replace the fuse with the same specification;

3. If the circuit is open, replace the damaged heater;

4. Find out which component is burnt, replace the component or provide after-sales service to our company, and replace it directly;

5. If the cause cannot be found, you can consult our after-sales customer service.

For more details of Ultrasonic Record Cleaning Machine, please feel free to contact us!