Ultrasonic Spark Plug Cleaner
UC-9000 series LCD display and controller ultrasonic cleaner, easy to operate; one-key degassing function, can quickly remove air in water, ultrasonic cleaning effect is better; self-developed MCU-SWEEP ultrasonic generator drive, the...
The spark plug has been used for so long, even if your electrode is not rusted, there is still a little carbon deposition on it, so you need to use an ultrasonic cleaner. It is best to choose low frequency and super power.
Cleaning steps
1. Remove the spark plug.
2. Put an appropriate amount of cleaning solution in the ultrasonic spark plug cleaner
3. Put the burner head down and evenly put it into the ultrasonic cleaning tank to soak the spark plug.
4. Turn on the ultrasound
5. The cleaning solution is getting darker and darker.
6. Rinse with clean carburetor cleaning fluid
7. Dry or blow dry.
Specification of Ultrasonic Spark Plug Cleaner
| Model No. | The tank size（L*W*H） | Dimensions（L*W*H） | Capacity（L） | Gross weight (KG) | Ultrasonic power (W) | Heating power(W) | Drain valve | Frequency(KHz) | Time (Min) | The heating temperature (℃) |
| UC-9120 | 240*135*100 | 304*165*292 | 3.2 | 4.77 | 120 | 100 | Yes | 39±1.5KHz | 10Sec~100Min | 20~80 |
| UC-9120L | 240*135*150 | 304*165*292 | 5 | 5.4 | 120 | 200 | ||||
| UC-9180 | 300*150*100 | 367*176*292 | 4.5 | 5.65 | 180 | 200 | ||||
| UC-9180L | 300*150*150 | 367*176*292 | 6.8 | 6.2 | 180 | 200 | ||||
| UC-9240L | 300*240*150 | 379*265*292 | 11 | 8.5 | 240 | 300 | ||||
| UC-9360 | 330*300*150 | 409*325*317 | 15 | 11.5 | 360 | 400 | ||||
| UC-9360L | 330*300*200 | 409*325*367 | 20 | 12.5 | 360 | 400 | ||||
| UC-9480 | 500*300*150 | 581*325*317 | 22 | 14.5 | 480 | 500 | ||||
| UC-9600 | 500*300*200 | 581*325*387 | 30 | 16 | 600 | 500 |
FAQ
Q: How to repair the ultrasonic cleaning machine with small vibration
Generally, the ultrasonic vibration is small for the following reasons:
1. The service time is long, the transducer is aging, and the performance is attenuated. The maintenance method can appropriately increase the ultrasonic power. However, this method will increase the heating capacity of the transducer and cannot fundamentally solve the problem. It is recommended to replace all the transducers.
2. Some transducers are damaged. Replace the damaged transducers with matching transducers.
3. The working point of power supply and transducer drifts, and the working point shall be readjusted.
4. The power of the cleaning machine is small. Replace or modify the power supply and increase the number of transducers.
5. The working environment of the cleaning machine, such as the type of cleaning agent, cleaning temperature, liquid level, etc.
6 Ultrasonic attenuation caused by other unknown conditions, such as the placement of cleaning materials and the replacement of cleaning agents.
For more details of Ultrasonic Spark Plug Cleaner, please feel free to contact us！
Send Inquiry
