Ultrasonic Transducer for Welding

The frequency of ultrasonic transducer for welding is usually between 15KHz and 40KHz. The common ultrasonic power and ultrasound frequency are 20kHz 1500W, 20kHz 2000W, 15KHz 2600w, 15KHz 3200W, 15KHz 4200W and other specifications.

Specification Ultrasonic Transducer for Welding

FAQ：

Trouble shooting in application of ultrasonic welding machine

1、 After turning on the machine switch, the power light does not work, and the machine does not respond

The reason for this may be that the fuse of the machine is burnt, or the plug is not plugged in properly, or the socket is in poor contact. It is necessary to check the fuse and socket.

2、 When the power is turned on, the indicator lights up, the machine does not operate, and there is ultrasonic output

This may be due to a problem with the program circuit board of the machine or an open circuit in the circuit.

3、 The indicator lights up after the power is turned on, the machine does not operate, and there is no ultrasonic output

The reason may be:

1. The emergency stop switch of the machine is pressed;

2. The power transformer is not of proper model;

3. There is a problem with the circuit board

4、 After the power is turned on, the machine operates, but there is no ultrasonic output

The reason may be that the transformer power supply of the machine is abnormal, or the power cord of the motherboard is not in good contact.

5、 The machine works normally during the test, but does not act during the formal operation

The cause may be: the work switch is damaged or the core wire connecting the machine to the frame is open circuit.

For more details of Ultrasonic Transducer for Welding, please feel free to contact us！