Ultrasonic Welding Converter Transducer

The acoustic system for ultrasonic plastic welding machine consists of three parts: 1 driving part, 2 fixing parts and 3 working parts. In the above three components, the drive is the core, and the longitudinal vibration Ultrasonic Welding Converter Transducer clamped by bolts is generally used, in which the half wavelength longitudinal vibrator is connected with the quarter wavelength longitudinal vibrator, the half wavelength longitudinal vibrator is connected with the half wavelength condenser to form a full wavelength plastic welding transducer, and the quarter wavelength longitudinal vibrator is connected with the quarter wavelength condenser to form a half wavelength transducer.

Specification of Ultrasonic Welding Converter Transducer

FAQ

Q：What is the reason for the smoke between the die head and the transducer of the ultrasonic plastic welding machine?

It may be that the transducer is broken. Check it, remove the mold, and detect the sound wave. It can be determined quickly

Q:  The front cover of the Ultrasonic Welding Converter Transducer and the amplitude transformer are connected together. There are many small holes on it. What's the use of these holes. And what exactly is this threaded structure like?

These holes are actually useless. They are usually used for heat dissipation and appearance only. The external thread is used for connecting the protective housing. The threaded hole is used for connecting the horn

Q:  What is the meaning of the groove on the hole side? It seems that there are grooves where the ceramic chips are connected?

The groove on this side is mainly used to eliminate the ultrasonic scattering loss, so as to prevent the ultrasonic energy from transmitting to the shell

For more details of Ultrasonic Welding Converter Transducer, please feel free to contact us！