Installation and inspection steps of ultrasonic vibrating screen

Aug 04, 2022

1. According to the identification of the ultrasonic generator, insert the interface directly and lock it, so that the power supply of the ultrasonic generator is correctly connected with the ultrasonic interface of the screening machine.

2. Turn the fine-tuning knob on the power supply of the ultrasonic generator to the minimum, turn on the power switch of the ultrasonic generator, and investigate whether the ammeter is abnormal (under normal conditions, the current should be less than 200mA)

3. Check and debug the three-dimensional vibration screening filter, and make the material running track reach the standard running track.

4. Run the three-dimensional vibration screening filter (rotary screen), slightly feed and fine tune the rotation on the power supply of the ultrasonic generator to make the screen reach an ideal condition. (current should be less than 200mA)

5. Under normal conditions, the ultrasonic vibrating screen can feed evenly and then enter normal operation.

screen system (1)