Knowledge

Why can't ultrasonic transducers for cleaning be used in air, but welded tran...

Because the design of the ultrasonic transducer used for cleaning is different from that of the welded transducer, the ultrasonic transducer used for cleaning can be used in the air with a transformer

The basic principle of ultrasonic transducer?

A brief introduction of ultrasonic transducer Ultrasonictransducer, named as Ultrasonictransducer, is an energy conversion device that converts high frequency electric energy into mechanical energy. I

Ultrasonic welding plastic parts half an hour, transducer and welding head fe...

1, loosen the screws on the movable frame cover and take out the transducer kit; 2, the required ultrasonic mold 3, the ultrasonic bottom mold (first put the plastic parts into the bottom mold) into t

What should ultrasonic transducer welding pay attention to?

1) Do not use corrosive flux! Better use rosin! 2) The power of the electric iron should not be too large! Within 50 watts! 3) Fast welding time! Don't burn off the plating! 4) Soft multicore wire

Why does ultrasonic welding machine often break transducer?

There are only three reasons: 1, ultrasonic welding machine quality problems; 2. In the process of use (because the ultrasonic welding machine does not debug the mold well before use, or overload oper

What is the smoke between the mold head and the transducer of ultrasonic plas...

What is the smoke between the mold head and the transducer of ultrasonic plastic welding machine? Maybe the transducer is broken, so we'll check it, take the mold off, check the sound waves, and w

The ceramic plate of transducer of ultrasonic plastic welding machine is easy...

The most important is the wrong frequency, and then the impedance is large

Abnormal sound of transducer of supergenerating wave welding machine

It's the gearbox. Transmission abnormal sound is more complex, because of different reasons for failure, the sound is not the same, generally divided into gear ring and bearing ring. 1, loose bear

What methods can reduce the noise of ultrasonic cleaning

The noise problem in the ultrasonic cleaning process is of particular concern to you. Due to its special cavitation effect, generally speaking, the noise can not be completely eliminated, but in order