Screening recommendation of positive and negative battery materials - ultrasonic vibrating screen
Feb 01, 2023
The process flow of positive, negative and material is positive and negative: take lithium cobaltate as an example: take cobalt tetroxide, conductive agent (acetylene black) and adhesive as raw materials Crushing (air mill) → raw material weighing in proportion (weighing meter) → mixing (mixer) → sintering (sintering furnace) → crushing (air mill) → screening (ultrasonic) → iron removal (permanent magnet iron remover) → packaging (including vacuum feeding or vibration feeding and dust removal equipment) Negative sum: take natural graphite as an example: graphite → crushing → mixing → high temperature oil removal (steel belt furnace) → Chemical purification - drying → screening → mixing → coating carbonization → demagnetization (magnetic separator) → screening (ultrasonic) → production of packaging and screening problems: some manufacturers have poor material fluidity, high viscosity and low output due to process factors; Maintenance rate: from less than half a year to more than one year, the ultrasonic probe, circuit and power supply will have maintenance points; Screen service life: some manufacturers report that the screen service life is short; Pollutant: iron and copper metal will pollute raw materials, resulting in the reduction of battery capacity; Oversize screening: materials exceeding the mesh size appear in the material under the screen, increasing the probability of diaphragm damage
The ultrasonic vibrating screen has the following characteristics: the hardness of the ternary material is high, and it will wear 304 stainless steel, which will cause the metal substances in the stainless steel to pollute the material and reduce the battery capacity. The Teflon coating is added in the screening equipment to increase the wear resistance and lubrication of the equipment. The ultrasonic generator works and resonates with the mesh frame, which is transmitted to the screen surface through the mesh frame, making the screen generate high-frequency vibration, which has achieved the purpose of rapid screening and preventing blocking. It can solve the screening problem of ultrafine powder, difficult particles, flocculent materials, dendritic materials and other materials. It is applicable to 40-635 mesh, especially fine particles with 100 mesh. The screening size is raised to 1-70%, and the maximum yield is increased by 10 times







