The purpose of using ultrasonic cleaning machine correctly

1. In order to avoid cleaning the tank, the transducer falls off due to thermal expansion and cold contraction, so the overheated cleaning liquid can not be suddenly poured into the cleaning cylinder.

2, the correct choice of cleaning agent, cleaning effect is very important, according to the required cleaning object surface attachment, to determine the cleaning agent. Generally: degreasing agent, rust remover, paint remover, carbon remover, wax remover, and other organic chemical cleaning agent. The solution containing strong acid and alkali cannot be injected into the cleaning tank to corrode the cleaning tank.

3, ultrasonic cleaning machine in the process of work, will make the liquid produce a certain temperature, the liquid temperature of the liquid, the summer is generally stable at about 55℃, in winter at about 45℃. If the choice of solvent cleaning, we must pay attention to understand the temperature of the solvent ignition point? If the use of flammable solvent cleaning, should pay attention to the temperature change in the cleaning tank, if the liquid temperature is too high, should turn off the ultrasonic power supply, to be cleaned after the solvent temperature drops, to ensure safety, if the use of flammable solvent cleaning "can not be heated", otherwise it may catch fire.

4, the need to clean the object into the cleaning basket or special fixture, the cleaning object does not contact with the tank will have better cleaning effect.

5, the heater is installed at the back of the inner groove below 2/3 part, when heating, do not touch the heating plate with your hand, be careful of burns, when the liquid level is less than 2/3 inner groove height can not be heated, it is recommended not to ultrasonic inner groove solution, long-term heating to 80℃ or more, it will shorten the service life of ultrasonic cleaning machine.