What about ultrasonic cleaning machine?

If the ultrasonic cleaning machine can be popular in the products provided and favored by consumers, it must be very practical. Because the ultrasonic cleaning machine itself provides services for the equipment, if the service level is not high, no enterprise will choose it. Because the physical properties of the cleaning solution will seriously affect the ultrasonic cleaning technology, the vapor pressure, surface tension, viscosity and density have the greatest impact on the ultrasonic cleaning technology. The temperature of the cleaning solution will affect these factors, and the temperature of the cleaning solution will affect the cavitation efficiency.

The total cross-sectional area of the cleaning object of the ultrasonic cleaning machine shall not exceed 70% of the cross-sectional area of the ultrasonic water tank. If the items to be cleaned are rubber or non tempered plastics, they will absorb ultrasonic energy and therefore cannot be cleaned with an ultrasonic cleaner.

When the ultrasonic cleaning machine is damp, the plug connected to the sensor can be checked with a megger. Check the insulation resistance value to judge the basic situation. Generally, the insulation resistance is required to be greater than 5 megohm. If this insulation resistance value is not reached, the sensor is usually wet. You can put the whole transducer (excluding the plastic sprayed shell) into the oven and set it at a temperature of about 100 ° C for 3 hours, or use a blower to remove the moisture to the resistance value.

Generally, it can be judged by checking the plug connected to the sensor with a megger and checking the insulation resistance between the positive and negative poles of the sensor. Generally, the insulation resistance shall be greater than 30 megohm. If this insulation resistance value is not reached, the transducer may be wet. The maintenance method is to put the whole transducer (excluding the plastic sprayed shell) into the oven and set it to about 100 ℃, dry it for 3 hours, or use a blower to remove moisture until the resistance value is normal. The transducer is ignited by vibrator and the ceramic material is broken. Visual inspection and megger can be used during maintenance. Generally, as an emergency measure, a single damaged transducer can be disconnected without affecting the normal use of other transducers.

If the ultrasonic cleaning machine can stand out among the products provided and sell well, it must prove that it has many advantages. For example, it may be very energy-saving and will not waste too much power during long-term use. It can also be very durable and can be used for many years as long as it is properly maintained.