What is the cleaning range of an ultrasonic cleaning machine?

1. Ultrasonic cleaning of filter elements. We know that regardless of the material or purpose of the filter, after a period of use, it will be scrapped due to reduced permeability caused by impurities. Ordinary filter elements are still affordable, but for the chemical fiber industry, an imported filter element costs nearly ten thousand yuan. It is a pity to abandon it. We have collaborated with other scientific research units to develop an ultrasonic filter cleaning machine that uses a concentrated energy ultrasonic cleaning machine, It can concentrate more than 1KW of energy in 200 × On a 20mm2 radiation surface, the ultrasonic intensity is high, which can quickly remove blockages. At the same time, the equipment adopts an anti filtration device. As long as you provide the wave core, we can provide you with a complete cleaning device. The time for washing a filter element in this device is 10-15 minutes. Applicable to PP cotton filter element, activated carbon filter element, hollow fiber filter element Ceramic membrane filter element.
2. Ultrasonic cleaning of metals. As is well known, after metal bars are extruded into wires, there is often a layer of carbonized film and oil on the outside of the wire. It is difficult to remove dirt (especially the entire wire) using acid cleaning or other cleaning methods. Ultrasonic wire washing machine is a continuous wire walking and efficient cleaning equipment designed according to actual production needs. The rough washing part is composed of a cleaning solution storage tank, a transducer, a circulating pump, a filter, and a supporting pipeline system, After rough ultrasonic cleaning and fine washing, the metal wire is blown dry to complete the entire cleaning process. The entire equipment is integrated and controlled, which is simple, convenient, and effective. It is widely used for tantalum wire, tungsten wire, molybdenum wire, niobium wire, copper wire (before insulation paint coating) and other metal wires.
3. The application of ultrasonic cleaning technology in phosphating treatment. The pre-treatment process before product spraying is very important. Generally, traditional processes use acid solution to treat workpieces, which causes heavy environmental pollution and poor working environment. At the same time, the biggest drawback is that the residual acid after pickling and rust removal of structurally complex parts is difficult to clean. After the workpiece is sprayed for a short time, corrosion occurs along the gaps, damaging the coating surface and seriously affecting the appearance and internal quality of the product. After the application of ultrasonic cleaning technology to the pre-treatment of painting, not only can the dirt on the surface and gaps of the object quickly peel off, but also the sprayed layer of the painted part is firm and will not rust back.