Ultrasonic Jewellery Cleaner

Ultrasonic cleaning machine is currently recognized as one of the cleaning methods with good cleaning effect and high efficiency. Professional ultrasonic jewellery cleaner is specially used to clean necklaces, rings and other jewelry such as gold, diamonds and platinum, which can effectively clean and remove dirt, disinfect and sterilize.

Specification of Ultrasonic Jewellery Cleaner:

FAQ：

Q：How to operate the ultrasonic jewellery cleaner correctly?

1. Put the items to be cleaned into the cleaning basket of the cleaning machine, and then put the cleaning basket into the cleaning tank. Do not put the items directly into the cleaning tank to avoid damaging the equipment and cleaning effect.

2. According to different products or cleaning effects, pour the cleaning liquid, water or aqueous solution in proportion, and the water level shall not be lower than 60mm at the lowest and not exceed 80mm at the highest.

3. Connect the power supply.

4. Turn on the switch button of the ultrasonic cleaning machine, and the green switch lights up to show that it works normally.

5. According to the cleaning requirements of articles, turn on the temperature control of ultrasonic cleaning machine to adjust the temperature.

6. When the temperature indicator lights out and the heater meets the required requirements, the heater will stop working. If it is lower than the set temperature, the heater will continue to heat automatically.

7. When the heating temperature reaches the product cleaning requirements, the cleaning timer can be started, and the working time of the timer can be set according to the product cleaning requirements.

8. General items should be cleaned for 10 minutes to 20 minutes. For workpieces that are difficult to clean, the cleaning time can be appropriately extended to ensure the cleaning effect.

9. The position of the timer can be arbitrarily adjusted within 1-20min, and it can also be adjusted in the normally open position. Generally, the cleaning time is 10~20min. For parts that are particularly difficult to clean, the cleaning time can be appropriately extended.

10. After cleaning, take out the cleaning basket and wash it with warm water or rinse it in another warm water cleaning tank without solvent.

11. After cleaning, the articles should be dried, stored and assembled.

For more details of Ultrasonic Jewellery Cleaner, please feel free to contact us !