Ultrasonic Rotary Sewing Machine

Ultrasonic rotary sewing machine uses semi-automatic ultrasonic seam welding technology, leading dual-motor drive, to ensure the balance and stability of power when the machine is running. The integrated ultrasonic lace machine can directly sew all kinds of fabrics, while trimming, splitting, and printing at the same time, so that the product can be formed at one time without burrs and splinters. The semi-automatic eco-friendly bag machine uses ultrasonic waves to directly wrap various materials, hot stamp them, and press them into various patterns to maintain the quality of the product process and increase the service life of the machine. It is suitable for processing non-woven chemical fiber cloth, wireless stitching, edge trimming and automatic trimming. Ultrasonic rotary sewing machine can be used for straight stitching, turning stitching and rotating stitching.

Parameters of Ultrasonic Rotary Sewing Machine

Features

• Fast, economical and high stitching strength

• No need to use auxiliary materials (such as: nails, glue, paper clips, etc.)

• Ensure consistent results throughout the production process

• No time-consuming warm-up and recovery, and no expensive cost to maintain the temperature

• Independent cutting and stitching, no burrs

• No pollution, avoid the use of toxic viscose and solvent

• There are no needle holes in the seam, which can prevent the penetration of chemical agents, pathogens and tiny harmful particles

•  

FAQ

Q: What are the common adjustment methods of ultrasonic rotary sewing machine?

A: Adjusting method of ultrasonic non-woven embossing machine

1. Turn on the power switch, the built-in light of the switch is on.

2. Adjust the air pressure: The air pressure valve is next to the head pressure gauge. According to the thickness of the processed material, or the nature of the processing (embossing or seam), the air pressure should be higher when adjusting the pressure to process thick materials or embossing; on the contrary, for thin materials or seams, the air pressure should be lower. The air pressure is generally adjusted within the range of 2~5Kg/cm2.

3. Sound wave detection adjustment: (When the flower wheel is not in contact with the steel mold at the upper limit)

1) Press the "audio test" switch, if the amplitude display indicator rises sharply and exceeds 100, it means that the frequency is too far from the resonance point and needs to be adjusted. Audio adjustment" knob. Look at the amplitude display, press the "audio test" check switch with the left hand (not more than 3 seconds), and turn the "audio adjustment" knob with the right hand to adjust the pointer to the lowest point. When adjusting, if the index is not falling, but rising, it will rotate in the opposite direction. The reading of the amplitude meter index is within 50, and the reading of the ammeter index below 0.6A is the best working point. After adjusting the sound wave, tighten the butterfly nut.

2) During the no-load test, if the "overload indicator" light is on, it means there is a problem with the Ultrasonic Rotary Sewing Machine. If it can't work, it should be shut down and checked.

4. Check the pneumatic parts:

1) Press the cloth press wheel switch (on the left side of the machine head, the red button switch) to check whether the upper press wheel is flexible.

2) Step on the flower wheel lift switch (flower wheel pedal) a few times, Check whether the flower wheel rises and falls flexibly.

For more details of Ultrasonic Rotary Sewing Machine, please feel free to contact us !