Ultrasonic Transducer Cleaning
Ultrasonic vibrator, also known as ultrasonic vibrating head, is a kind of ultrasonic transducer and the core component of ultrasonic cleaning machine. The industry standard name is ultrasonic transducer, which belongs to piezoelectric ceramic material.
The main part of an ultrasonic cleaning equipment is called an Ultrasonic Transducer Cleaning; this piezoelectric ceramic material has that name as its standard designation in the industry.
Product features:
1. High mechanical Q value, high electro-acoustic conversion efficiency, high consistency, and simple matching all contribute to high efficiency.
2. Strong amplitude: The ultrasonic cleaning vibrator can quickly manage working conditions due to its high vibration speed.
3. Wide operating temperature range, low resonance impedance, continuous operation, and low heat generation are all indicators of good heat resistance.
4. Rare earth elements are incorporated into the piezoelectric ceramic material, which efficiently lowers heat generation, increases conversion efficiency, and extends service life.
5. 100% of the quality of our ultrasonic transducer cleaning has been checked.
Specification
Introduction to the use of Ultrasonic Transducer Cleaning:
1. There are two black or yellow piezoelectric ceramic plates in the middle of the oscillator, with the positive electrode sandwiched between them.
2. The positive electrode and the upper and lower metal are not conductive, while the negative electrode and the upper and lower metal are conductive. Conventional operation does not require the negative electrode to be fully connected because all negative electrodes and shells are conductive.
3. Connect all oscillators in parallel to the ultrasonic generator
4. Oscillator connection method: Generally, it is 2.5 square meters of multi-strand copper wire soldered connection, without false soldering. It is not advisable to use screws to fix the position of wires
5. Experimental operations mostly belong to the category of air shock, which is different from normal use. I am not responsible for the experimental results. The failure rate of the experimental type is relatively high.
6. Vibrator installation: screws+glue, welded to stainless steel plate, glue evenly applied to the surface of the vibrator.
Curing in a relatively dry place with air, wiring can be done within 4-8 hours, and after 24 hours, the machine can be powered on for testing (depending on the adhesive and room temperature)
Preparation tools: argon arc welding, No.10 Allen wrench, chrome iron tin wire. 2. Square meter high-temperature wire 2.5 cable, appropriate amount, with glue, (wire stripping pliers, sleeves, ties, sandblasting machines, pipe fittings, etc.).
Welding screws. Calculate the arrangement position of the vibrator, maintain the cleanliness and flatness of the screw position, sandblast the welding position of the burst nail, and use argon arc welding vertically
For more details of ultrasonic transducer cleaning, please feel free to contact us !
Send Inquiry
