Ultrasonic Frequency Transducer

Ultrasonic Frequency Transducer is an important component of ultrasonic cleaning machine, which converts electrical signals into mechanical vibrations. Our ultrasonic transducer is made of high-quality aluminum alloy and uses imported piezoelectric ceramic sheets, which have good heat resistance. It has a large amplitude, high mechanical value, and high energy conversion rate. We have 20/25/28/40/68/100/120/130/200kHz ultrasonic cleaning transducers that can meet different cleaning needs.

Specification of Ultrasonic Frequency Transducer

Question: How many ultrasonic frequency transducer parts can be put in the ultrasonic cleaning tank?

A: This actually depends on the size of the cleaning tank.

Question: can plastic parts be cleaned?

A: Yes, ultrasonic cleaning is an ideal choice for plastic parts.

Question: can the contamination on the circuit board be removed?

A: Yes, you can use ultrasonic cleaning to clean the circuit board.

Question: How to prevent the Ultrasonic Frequency Transducer from getting damp?

1. The oscillator should be stored in a dry and well ventilated environment, avoiding moisture and direct exposure to moisture.

During storage or transportation, use moisture-proof packaging materials such as plastic bags, moisture-proof agents, etc. to prevent external moisture from entering.

3. Regularly check the storage environment of the oscillator to ensure that there is no accumulation of moisture or water leakage. Regularly check the insulation resistance value of the oscillator using tools such as a megohmmeter to ensure it is within the normal range (usually requiring an insulation resistance greater than 30 megohms).

If the oscillator is found to be damp, it should be dried immediately.

4. During use and maintenance, avoid direct contact between the oscillator and water or other liquids.

5. Place moisture-proof agents, such as silicone, in the environment where the oscillator is stored to absorb moisture from the air.

Question:How to prevent the oscillator from debonding?

1. Choose a transducer that adopts a dual guarantee process of bonding and screw fastening. This process can significantly reduce the risk of detachment of the oscillator in general, as the action of the screw prevents the oscillator from falling off the vibration surface after detachment.

2. In daily use, special attention should be paid to avoiding hitting the vibrating surface. Impact is one of the main reasons for the detachment of the oscillator, so avoiding impact can effectively extend the service life of the oscillator.

3. Regularly check the glue condition of the oscillator. The risk of delamination can be determined by gently shaking the tail of the oscillator by hand and carefully observing the adhesive situation on the vibrating surface.

For more details of ultrasonic frequency transducer, please feel free to contact us!