What are the precautions for ultrasonic embossing machine?

1. When starting the ultrasonic embossing machine, do not open the cover of the ultrasonic vibrator to avoid high pressure injury or damage to the machine.

2. The ultrasonic lace machine must be grounded reliably.

3. When the ultrasonic generator is working, the output end must not be open circuited.

4. When the ultrasonic generator is working, if the ammeter indicates more than 2A and the power is insufficient (the phenomenon is no trimming and no perforation), it should be shut down immediately, and it can be started only after the fault cause is found out.

5. The continuous working time of the machine is 8 hours.

6. When the ultrasonic lace embossing machine is not in use, loosen the pressure wheel, cut off the air source and loosen the flower wheel.

7. The machine must be maintained by special personnel.