Ultrasonic Cleaning PCB Board

Ultrasonic Cleaning PCB Board is the main component of a multi frequency ultrasonic generator, and its frequency is adjustable. It has an automatic frequency tracking function, which can automatically adapt to the frequency changes of the transducer without adjusting the frequency. The frequency error range is plus or minus 1.5KHz. Its circuit is stable and will not experience current overload. At the same time, it adopts a unique frequency sweep working method, and the cleaning solution can form a small reflux flow, timely washing away the dirt not covered by ultrasound from the surface of the workpiece, achieving faster and more thorough cleaning effect, and improving the efficiency of ultrasonic cleaning.

Specification of Ultrasonic Cleaning PCB Board

FAQ：

Q: How does the ultrasonic cleaning machine start burning the ultrasonic cleaning PCB board?

1. The transducer is short circuited

2. The rectifier bridge is broken

Q: The main board of the dental ultrasonic cleaner is broken, can it be repaired?

You can send it back to Shenzhen Jiayuanda Company. Our professional engineer team will provide you with professional after-sales service

Q: How to prevent the ultrasonic generator circuit board from burning out?

1. Correct setting of ultrasonic cleaning parameters:

Adjust parameters such as ultrasonic power, frequency, and cleaning time to ensure that the settings meet cleaning requirements and equipment specifications. Correct settings help improve cleaning efficiency and extend service life.

2. Design a reasonable cleaning plan:

Design a reasonable cleaning plan based on the characteristics of the circuit board to avoid overheating on the circuit board.

3. Check circuit board components:

Regularly inspect the circuit board components for damage, and replace them promptly if damaged. Before maintenance, it is necessary to understand the location and specifications of circuit board components and replace them with matching components.

4. Check the connection line:

Poor wiring is one of the common causes of circuit board failures. It is necessary to regularly check whether the connection lines are in good contact, and handle them after confirming that there are no errors.

5. Control external environmental factors:

Avoid equipment working in special environments with moisture, high temperatures, and high voltages, keep the environment dry and ventilated, and avoid large temperature and voltage fluctuations on the equipment.

6. Monitoring and adjusting load and power supply:

Ensure that the load during the cleaning process of the ultrasonic machine does not exceed the load capacity of the amplifier board. At the same time, the power configuration should be correct and meet the equipment requirements.

7. Check the control signal:

Regularly check whether the control signal circuit is normal, including on/off signals, ultrasonic output signals, etc., to ensure their normal transmission.

8. Impedance matching:

Pay attention to the impedance matching issue between the ultrasonic generator and the acoustic vibration system to avoid burning the power tube due to impedance mismatch causing the temperature of the power tube to rise

For more details of Ultrasonic Cleaning PCB Board, please feel free to contact us !