Ultrasonic Vibrating Screen Power Supply

Ultrasonic Vibrating Screen Power Supply: High frequency and high-power ultrasonic resonance power generator, using a two-stage LED display system to display the working status. It can quickly and automatically track resonance points according to different screening states (different material grid structures), achieving maximum power output and long-term operation without heating up the transducer. The transducer installation can be used without dismantling the grid, and cleaning is fast and convenient.

The power generator of the ultrasonic vibration screening machine is a simple and practical solution to effectively solve the problem of mesh blockage in the screening process of materials, which can be achieved through a linear vibration screen with the most layers. It can be widely used in industries such as pharmaceuticals, metallurgy, chemical engineering, mineral processing, and food that require fine screening and filtration. With high screening and filtration accuracy, it effectively solves problems such as agglomeration, static electricity, and strong adsorption clogging of mesh holes. It is a major technological breakthrough in the domestic screening industry.

The common types of ultrasonic vibration screens include rotary vibration screens, airflow screens, linear screens, etc. In addition to mechanical structures, their core technologies are mainly manifested in the power generator and transducer of ultrasonic vibration screens. With the rapid development of China's chemical industry, major industries have increasingly high requirements for the quality and quality of ultrasonic vibrating screens.

Speficiation of ultrasonic vibrating screen power supply

FAQ：

Before using the ultrasonic vibration system, please read this note carefully and operate according to the instructions to avoid unnecessary damage to the equipment.

1.The working input voltage of ultrasonic inspection screen power supply is AC 220V.

2.If the inspection requirements can be met, the vibration amplitude * shall not exceed 400ma.

3.The screen mesh must be tightened, otherwise the ultrasonic output and vibration effect will be affected.

4.The connecting screws of the aerial plug of the transducer must be tightened and wrapped with insulating tape to prevent dust. Pay attention to protecting this connector in use.

5.Before starting the machine, check whether the nuts of the transducer and the connector plug are locked, and whether the transducer and the screen frame are locked (the locking force is 40~50kg). During the use, pay attention to the protection of HF connecting cable between the chassis and the transducer, the HF connecting cable and the transducer socket shall be protected from moisture, and the connecting plug and socket shall not be allowed to enter water.

6.If the material conducts electricity, please use an extended ultrasonic HF connecting cable to isolate the power supply of the ultrasonic shale shaker from the screening site, so as to prevent the material from entering the power box and causing a short circuit.

7.Each set of ultrasonic system includes one ultrasonic vibrating screen power supply, one HF connecting cable, one transducer and one grid. Do not use the ultrasonic system interchangeably with other manufacturers to avoid unnecessary loss.

For more details of ultrasonic vibrating screen power supply, please feel free to cotact us！