Ultrasonic Cleaner Components

The ultrasonic cleaner components transducer is the most important part of the ultrasonic cleaning machine. No matter what kind of ultrasonic cleaning machine is based on the basic principle of "cavitation effect". Therefore, ultrasonic cleaning technology can have excellent cleaning ability for complex internal and external structures, uneven appearance, slits, holes, corners, and workpieces with dense components, which is unparalleled by other cleaning methods.

When high power is required to remove dirt without considering the surface damage of the workpiece, the lower cleaning frequency within the range of 20kHz to 30kHz is usually selected for cleaning large and heavy parts or workpieces with high-density data. High frequency is usually used to clean smaller and finer parts or remove large particles. High frequency is also used when the workpiece surface is not allowed to be damaged. Using high frequency cleaner can improve the cleaning function in many ways.

FAQ：

How to distinguish the quality of ultrasonic transducer？

Ultrasonic Cleaner Components is the heart of ultrasonic products, It converts the high-frequency and high-voltage power supply from the electric box into high-frequency mechanical vibration, and the maximum power output can reach several thousand watts. Therefore, its stability and power output are very important to the operating performance of the whole machine, and they are also the most valuable of the equipment. It is the key to reflect the value of the whole equipment. The following are the methods to detect the quality of the ultrasonic transducer:

1. Parameter detection

Check whether the parameters of the Ultrasonic Cleaner Components transducer match the parameters of the electric box and whether the desired effect can be achieved.

2. It can be identified from its manufacturing process and appearance

The quality of products with good workmanship and appearance will naturally be better. And the design process directly affects the product quality.

3. It can be identified according to its process design and materials used

Whether the design is reasonable or not should be determined according to the selected materials. The quality of materials directly affects the quality of products.

4. Machine working test:

(1) . Stability test (simulated aging test); Test the stability of the power output of the electric box and transducer with the rated load of the equipment.

(2) . Overload operation test; Test the stability and service life of product quality. This test only needs to run continuously with rated load for 8 hours.

(3) . Power output test; It can detect the matching between the transducer and the electric box, and can reflect the load power output of the electric box and the transducer.

For more details of Ultrasonic Cleaner Components, please feel free to contact us!