How to use single groove ultrasonic cleaning machine, what should be paid attention to？

The use of single groove ultrasonic cleaning machine:

1. Put the items to be cleaned into the cleaning basket of the single tank cleaning machine, and then put the cleaning basket into the cleaning tank. Do not put the items directly into the cleaning tank to avoid damaging the equipment and cleaning effect.

2. According to different products or cleaning effects, pour cleaning liquid, water or aqueous solution into the mixture proportionally. The water level shall not be lower than 60mm and the water level shall not exceed 80mm.

3. Connect to the three-core socket of 220V/50Hz power supply and switch on the power supply.

4. Open the switch button of the single slot ultrasonic cleaning machine, and the green switch shows normal operation.

5. According to the cleaning requirements of the articles, open the temperature control of the ultrasonic cleaning machine to adjust the temperature.

6. Temperature indicator off The heater will stop working if it meets the required requirements. If it is lower than the set temperature, the heater will continue to heat automatically.

7. When the heating temperature reaches the cleaning requirements, start the cleaning timer and set the working time of the timer according to the cleaning requirements.

8. General items cleaning in 10 minutes to 20 minutes, for difficult to clean the workpiece, can be appropriately extended cleaning time, to ensure the cleaning effect.

9 timer position can be adjusted in 1-20min, can also be adjusted in the normal position. General cleaning in 10~20min, for particularly difficult cleaning parts, can be appropriately extended cleaning time.

10. After cleaning, remove the basket from the tank and wash it with warm water or rinse in another tank with warm water and no solvent.

11. Items should be dried, stored and assembled after cleaning.