What are the structures of ultrasonic compounding machine?

1. Loading area (feeding area).

2. The semi-finished products are placed on the material rack and introduced through the guide wheel for roller coating.

3. Rubber wheel: accept the pressure of the air raft to make the rubber surface contact the processing wheel (printing wheel).

4. Processing wheel:the steel wheel plate is engraved with concave plates with different mesh numbers and rules for the use of grout into the rubber surface.

5. Printing wheel: the plate is engraved with concave plates and patterns of different depths to supply ink to the adhesive surface.

6. Scraper: scrape off the excess slurry (ink) of the steel wheel plate, evenly distribute it on the gravure plate, and adjust the pressure up and down and at different angles.

7. Slurry tank: it is used to hold slurry for wheels, and the position of the slurry tank is adjusted according to the diameter of the wheel eye.

8. Coiling: Drive the leather to the crystal rack by the tension of coiling.