Ultrasonic Welder For Sports Cards

The plastic certificate card shell components are assembled and welded via ultrasonic welder. The ultrasonic welding effect is firm, after the ultrasonic pressure welding of the plastic certificate card shell, the strength and appearance meet the customer's requirements, and the winding film can be placed to prevent the product from welding damage. The ultrasonic mold is designed according to the certificate card shell and made of aluminum alloy.

The ultrasonic pressure welding machine for plastic certificate card shell is guaranteed for one year, the ultrasonic mold is guaranteed for three months, and the whole Ultrasonic Welder For Sports Cards is maintained for life.

Specification:

FAQ：

Q：How to disassemble the ultrasonic welded plastic shell?

The inner edge of this plastic shell that has been ultrasonically welded often houses the welding site. The joint has a little gap that is visible from the outside. Start at this gap if you wish to open it. Before using any tools, forcefully press one of the gaps' four edges with your hand.

Even though the weld is currently partially damaged, you can hear it cracking. Pry around the weld seam along the short end with a steel ruler. After some fiddling and prying, the plastic shell can be split if the welding point is not very huge. If the welding site is large, insert the long side of the steel ruler flatly into the gap instead of prying with the narrow side. If the power housing has two steel rulers on either side, push down while also prying. The power supply enclosure can be totally disassembled in this manner.

Q:  How to solve the problem of plastic breakdown in ultrasonic welding?

The so-called breakdown generally refers to voltage breakdown. When we use ultrasonic method to weld the two materials together, we should control the temperature to prevent the temperature from rising too high, which will cause material degradation and greatly reduce the insulation performance. It is easy to break down.

Q：What safety protective equipment should be worn for ultrasonic welding

When operating ultrasonic welding, attention should be paid to the possibility of fingers being crushed, and it is best to wear an electrostatic ring to prevent static electricity; At the same time, you should wear earmuffs, as welding can cause noise and reduce your hearing

Q:  What cushion is used for Ultrasonic Welder For Sports Cards? The product won't scratch

Ultrasonic protective film is placed between the ultrasonic mold head and the product during the ultrasonic welding process to avoid scratches and burns caused by the mold head on the product. Ultrasonic protective film is a semi transparent protective film material that is frosted, non adhesive, non adhesive, soft and elastic, with a delicate touch. It has excellent practical performance and high reusability, with 5-8 times the number of times it is used as a regular adhesive film. The pressing force, frequency, and pressing time adjusted by ultrasound are different, The frequency of use will also vary, and it is an ultrasonic protective film specifically designed for plastic ultrasonic welding.

For more details of Ultrasonic Welder For Sports Cards, please feel free to contact us !